 |
 |
|
|
|
|
|
|
DOM - DRAWN OVER MANDREL CARBON STEEL TUBING
METAL-MATIC, INC CARBON STEEL TUBING
Certain applications require closer tolerances on O.D., wall thickness and I.D. than are available in off-the-mill welded tubing. Metal-Matic's Drawn Over Mandrel (DOM) tubing also possesses the higher mechancial properties achieved in cold drawing to these tighter standards.
After normalizing, the tubing is cold drawn through a die and over a mandrel to reduce diameter and wall thickness to required dimensions. Special smooth I.D. surfaces are available for critical applications such as hydraulic cylinders and shock absorbers.
Statistical process control is used to reduce variations in dimensional and other characteristics and is one of the tools used in our drive for continuous improvement. Our exacting quality control testing completes the process.
SIZE CHARTS
As-Welded Tubing Boiler Tubing Condenser Tubing DOM Drawn over Mandrel Tubing Heat Exchanger Tubing Hydraulic Cylinder Tubing Shapes home | contact us | employment | ©2006 Metal-Matic, Inc.
